iMovR Premium Drawer | Solid Wood
Availability: In stock
As low as $550.00
Price as configured: $550.00
The iMovR Solid Wood Premium Drawer is made with a beautiful solid wood drawer face. The spacious compartment is perfect for your documents, writing implements, office supplies, laptop computer, small electronics, and other personal effects. And its solid, made-in-America construction gives it a whopping 50 lb. load capacity. It features pass-through cable holes in the back, so you can easily charge devices in the drawer.
Need Bulk Order Pricing?
Contact Us Here!
The iMovR Premium Drawer
Highlights
- Beautiful solid wood drawer face matches your desktop perfectly
- Large storage capacity to hold more than just papers and pens
- Cable pass-through holes for in-drawer charging
- Drawer detent latch creates a smooth close without slamming or bounce-back
- Super sturdy steel frame construction holds up to 50 lbs.
- Made in the USA
- The iMovR Solid Wood Premium Drawer was designed to work with iMovR’s Solid Wood Lander Standing Desk 47″ and above, but that doesn’t mean that it can’t be installed on other desks. See below section titled "Fitting Guidelines" for further details.
An Exceptional Drawer for an Exceptional Desk
There are two big reasons that most standing desks don’t come with drawers. First, most desk frames have crossbars that limit the size of a drawer. (Sometimes it feels like a drawer that’s too small is worse than no drawer at all!) Second, the added weight of the drawer and its contents can overload the motors of desk frames with light-duty motors and poor manufacturing tolerances. The Lander Desk, however, overcomes both these problems easily, allowing us to offer the iMovR Premium Drawer.
The Lander Desk frame uses a C-Leg design, where the desk crossbar sits approximately two-thirds of the way back from the front of the desktop, rather than centered, as in the common T-leg design that many other desk models use. This allows the iMovR Premium Drawer to have slightly more than 14” of depth, making it useful for holding all sorts of items you might need close at hand, not just a few pens and papers.
Because of the Lander Desk’s precision manufacturing tolerances and 360 lb lifting capacity, we are able to offer a truly robust desk drawer. With a compartment made from high quality steel and weighing 16.6 lbs, the iMovR Premium Drawer can support up to 50 lbs. This rock-solid design is more than adequate for everyday use, but knowing how strong the Lander Desk is, we're confident that even a fully loaded drawer will not impact the performance of the vast majority of desktop setups.
Features that Make This Drawer Premium
The iMovR Solid Wood Premium Drawer has been designed to match the desktop of your Solid Wood Lander Desk, with the same wood species and stain combinations on the drawer face, rather than thin plastic or sheet metal like other drawers might have. Its shape blends the drawer smoothly into the rest of your desk and adds to its aesthetic appeal.
The drawer has two cable pass-through holes in the back panel, allowing you to charge your laptop or mobile devices in the drawer when they’re not in use. In combination with the Tucker Cable Tray (also found in the Tucker Advanced and Tucker Pro Cable Management Kits), keeping cables and cords off your desk and out of sight has never been easier.
The iMovR Solid Wood Premium Drawer glides smoothly on precision-engineered tracks with a detent latch at the back. Having a detent latch at the back of the drawer’s rails means that the drawer stays closed when you shut it, but opens easily as soon as you pull on it. The detent creates a smooth close, with no sharp slamming or bounce-back.
Solid Wood Drawer Faces in Species & Stain Combinations
We offer the iMovR Solid Wood Premium Drawer in all of our wood species and stain combinations—the exact same finishes that the Solid Wood Lander Desk is made with, ensuring a perfect match. Of course, nothing prevents you from ordering your drawer in a different color from your desktop. Some of the solid wood finishes we offer complement each other quite well. Our solid wood products are only made from sustainable, domestically-grown species of natural hardwoods, and we back this product with the same 5-year warranty as all our solid wood desktops, and our 100-day satisfaction guarantee. (You can read all about their sources and the honest materials that our artisan furniture makers use in hand-crafting heirloom-quality desktops, tabletops, and more here.)
Choose from any of the colors below. Click on any swatch to see it in a higher resolution.
Tier I
Red Oak
Red oak has color variations from light tan to pink, to red, to dark brown. This plain sawn oak is probably the most popular hardwood used in modern woodworking. Broad grains give red oak a pronounced appearance. It is heavy (42.5 lbs/cu ft), hard, stiff and highly shock resistant. Red oak has a medium fine, uniform grain.
Tier II
Maple
Silver maple is a highly versatile species with color variations from nearly white to light grey. Its lighter color allows us to offer more staining options than with any other species. Silver maple is moderately heavy (36.4 lbs/cu ft), strong and stiff, and moderately shock resistant. Silver Maple is known for its fine, uniform grain.
Rustic Cherry
Cherry has color variations from nearly white to light red to dark reddish brown. It is moderately hard, heavy (35 lbs/cu ft), strong and stiff, and highly shock resistant. Cherry is known for its fine to medium, uniform grain. The rustic cherry that was used in our desktops has visible knots and pitch streaks, giving it more character than costlier "select" cherry cuts, making it one of the most distinctive and interesting natural grain patterns for the dollar.
Hickory
Hickory has color variations from nearly white to dark brown. The combination of its hardness, strength, toughness, and stiffness are unmatched by any other hardwood. It is very heavy (50.5 lbs/cu ft), very hard, very strong, very stiff and extremely shock resistant. Hickory is known for its fine, uniform grain.
Tier III
Rustic Walnut
American black walnut is strong, hard and durable, without being excessively heavy (38 lbs/cu ft). Its color variations are light to dark chocolate brown. Walnut shows a wide range of figures, including strips, burls, mottles, crotches, curls and butts, giving it great character.
Select Cherry
Cherry is grown mostly in the eastern United States and has color variations from nearly white to light red to dark reddish brown. It is moderately hard, heavy (35 lbs/cu ft), strong and stiff, and highly shock resistant. Cherry is known for its fine to medium, uniform grain. The select cuts of cherry used for making these tops are free of large knots, pitch streaks and other imperfections found in "rustic" cuts, and showing off only their beautiful natural grain.
Tier IV
Quartersawn White Oak
This special quartersawn cut of the white oak tree is coveted for its incomparable beauty. It is commonly used in Craftsman style homes and furnishings. As compared to riftsawn and flatsawn cuts that are less spectacular, quartersawn has growth rings at angles of 45 to 90 degrees to the wide surface. White Oak is grown mostly in the eastern United States and has color variations from creamy white to medium brown. It is a heavy (45.8 lbs/sq ft), strong and very hard wood with high shock resistance and a medium fine, uniform grain.
Tier V
Select Walnut
American black walnut is strong, hard and durable, without being excessively heavy (38 lbs/cu ft). Its color variations are light to dark chocolate brown. The select cuts of walnut used for making these tops are free of large knots, pitch streaks and other imperfections found in "rustic" cuts, and showing off only their beautiful natural grain.
Trying to match something other than a Solid Wood Lander Desk? Find a match for your workspace with our iMovR Solid Wood Tabletop Samples.
Fitting Guidelines
Compatibility Within the iMovr Product Line
The iMovR Solid Wood Premium Drawer is designed to fit Solid Wood Lander 2-Leg desks with tops that are at least 47” wide. It is not designed to be installed on Solid Wood Lander Lite, Solid Wood Lander with SteadyType, or Solid Wood Lander-L Desks. Unless the desk is very wide it is recommended that the iMovR Solid Wood Premium Drawer not be installed on a desk that already has a keyboard tray installed due to space constraints.
For Solid Wood Lander desks produced before July 2021 you will need to drill the holes using the drill template provided. Solid Wood Lander desks produced since July 2021 are pre-drilled for the iMovR Solid Wood Premium Drawer to make installation even easier.
Using the iMovR Solid Wood Premium Drawer with Other Desks
The iMovR Solid Wood Premium Drawer was designed to work with the iMovR's Solid Wood Lander Standing Desk, but that doesn’t mean that it can’t be installed on other desks. However, there are a few things you should consider before you purchase this drawer to use on another standing desk.
Frame Clearance
The iMovR Solid Wood Premium Drawer’s frame extends 15.08” back from the edge of your desktop, and is 31.06″ across. Measure from the front edge of your desk to your desk’s crossbar to ensure that it will fit, and check that there is adequate width, as well.
Drawer Face Clearance
At its widest (along the top edge), the face of the iMovR Solid Wood Premium Drawer is 33.59″. Measure along your desk’s front edge to ensure you have enough space to install the drawer without interference from the hand controller or anything else mounted at the front of the desk.
Knee and Leg Clearance
The drawer requires 3.24″ of vertical space. When standing, this shouldn’t be a problem. Make sure that you can work comfortably at your desk while seated when your desktop is raised high enough for both your legs and the drawer underneath.
Weight Limits
The iMovR Solid Wood Premium Drawer is approximately 16.6 lbs. when empty. Make sure the drawer, plus anything you’re planning to keep in it, when added to the other equipment already on your desk, does not go over your desk’s weight rating. If you don’t plan on installing the drawer at the center of your desk, be aware that an uneven load can reduce the effective weight limit of a desk.
Desktop Thickness
The iMovR Solid Wood Premium Drawer is installed using eight ¾″ #9 Phillips-head screws. Your desk needs to be at least 1″ thick to ensure proper installation. Using shorter screws to install the drawer on slimmer desktops is possible but not recommended, as we cannot guarantee the 50 lb. weight capacity of the drawer in that situation.
Color Matching
You probably don’t want a drawer that clashes with your desktop. Remember, all computer, tablet, and phone screens display colors slightly different from one another. To ensure that the finish you’re thinking of going with matches or complements your existing desktop, order a few of our 4″ × 6″ color samples.
Other Options
If it turns out that the iMovR Premium Drawer will not work for your particular standing desk, consider the Hide-Away Storage Drawer, which works perfectly with most rectangular top sit-stand desks. If you need even more storage space, consider an under-desk Mobile File Cabinet.
Our Customers
