Desk Finishes

Desk finishes including 3D Laminate, Solid Wood, Butcher Block, and Base finishes.

Finish Samples

3D Laminate Finish Samples

3D Laminate Finish Samples

$1.00 USD

3D Laminate Finish Samples

$1.00 USD
  • Solid Wood Finish Samples

    Solid Wood Finish Samples

    $5.00 USD

    Solid Wood Finish Samples

    $5.00 USD
    Standing Desk Base Color Samples

    Standing Desk Base Color Samples

    $2.00 USD

    Standing Desk Base Color Samples

    $2.00 USD

    Our Standard 3D Laminate Finishes

    Two-Door Credenza - 3D Laminate - iMovR
    Designer White
    Two-Door Credenza - 3D Laminate - iMovR
    Fashion Gray
    Two-Door Credenza - 3D Laminate - iMovR
    Black
    Two-Door Credenza - 3D Laminate - iMovR
    Light Maple
    Two-Door Credenza - 3D Laminate - iMovR
    Almond Cherry
    Two-Door Credenza - 3D Laminate - iMovR
    Hayward Cherry
    Two-Door Credenza - 3D Laminate - iMovR
    Clove Mahogany
    Two-Door Credenza - 3D Laminate - iMovR
    Shaker Cherry
    Two-Door Credenza - 3D Laminate - iMovR
    Bella Walnut
    Two-Door Credenza - 3D Laminate - iMovR
    Natural Oak
    Two-Door Credenza - 3D Laminate - iMovR
    Ironwood
    Two-Door Credenza - 3D Laminate - iMovR
    Driftwood
    Two-Door Credenza - 3D Laminate - iMovR
    Swiss Elm
    Two-Door Credenza - 3D Laminate - iMovR
    Shark Gray

    Solid Wood FInishes

    Solid Wood Finish Samples - iMovR
    Natural Maple (Tier I)
    Solid Wood Finish Samples - iMovR
    Tawny Maple (Tier I)
    Solid Wood Finish Samples - iMovR
    Leather Maple (Tier I)
    Solid Wood Finish Samples - iMovR
    Espresso Maple (Tier I)
    Solid Wood Finish Samples - iMovR
    Whitewashed Maple (Tier I)
    Solid Wood Finish Samples - iMovR
    Moonlight Maple (Tier I)
    Solid Wood Finish Samples - iMovR
    Dockside Gray Maple (Tier I)
    Solid Wood Finish Samples - iMovR
    Midnight Maple (Tier I)
    Light Cherry - Rustic Solid Wood Swatch for Solid Wood Desks and Accessories
    Light Cherry - Rustic (Tier I)
    Solid Wood Finish Samples - iMovR
    Vintage Cherry - Rustic (Tier I)
    Solid Wood Finish Samples - iMovR
    Regent Cherry - Rustic (Tier I)
    Solid Wood Finish Samples - iMovR
    Natural Hickory (Tier I)
    Solid Wood Finish Samples - iMovR
    Natural Walnut - Rustic (Tier II)
    Solid Wood Finish Samples - iMovR
    Amber Walnut - Rustic (Tier II)
    Solid Wood Finish Samples - iMovR
    Caramel Walnut - Rustic (Tier II)
    Solid Wood Finish Samples - iMovR
    Light Cherry - Select (Tier II)
    Solid Wood Finish Samples - iMovR
    Vintage Cherry - Select (Tier II)
    Solid Wood Finish Samples - iMovR
    Regent Cherry - Select (Tier II)
    Solid Wood Finish Samples - iMovR
    Natural Quartersawn White Oak (Tier III)
    Solid Wood Finish Samples - iMovR
    Natural Walnut - Select (Tier III)
    Solid Wood Finish Samples - iMovR
    Amber Walnut - Select (Tier III)
    Solid Wood Finish Samples - iMovR
    Caramel Walnut - Select (Tier III)
    P1 ELITE+ Standing Desk 30x59-iMovR

    3D Laminate Advantages

    Seamless Durability

    3D lamination can be fabricated into contoured and creatively-shaped surfaces while eliminating edgebanding, T-moldings, and visible seams. Engineered for stunning aesthetics and durability, they feature higher impact, scratch and stain resistance than traditional HPL surfaces. 

    3D Laminate FAQ

    3D Laminate vs Traditional Surfaces

    3D lamination is applied at a high temperature and high vacuum pressure to perfectly bond the laminate to the wood core at the molecular level.

    The conventional process for manufacturing a table top (so-called high-pressure lamination, or "HPL") involves gluing down a thin sheet of laminate to the top of an MDF (particle board) panel. Melamine, or some other low-cost material, is typically glued to the bottom of the panel to protect the wood. Finally, PVC plastic strips, usually matching the color of the top lamination, are glued down to all four edge surfaces.

    Hundreds of manufacturers use this traditional method of fabricating tops for office desks and tables every day. Due to the inflexible nature of the laminate sheets, the result is a rectangular product with sharp edges where the six sides meet, and usually on all four corners as well. Because of the inflexibility of standard HPL, T-molding, edgebanding, visible seams or other special edge treatments are always required to make a desktop. Each of these has significant disadvantages and long-term durability and visual appearance.

    3D lamination is a state-of-the-art process adopted by very few manufacturers outside of health care. While 3D laminate film materials are more expensive than sheet laminate, there is an inherent cost saving in labor. This is because a single film of laminate can be wrapped entirely around the topandsides of the wood in a single operation, eliminating the need to separately glue down PVC strips to the four edges of the tabletop. The result is a far superior product at a comparable cost to conventional HPL. With 3D lamination, the wood can be contoured for ergonomic edging and other features, including grommet holes, before the laminate is applied. Once the laminate is applied, the tabletop takes on the look of having been extravagantly carved out of a single slab of hardwood. Same look, a fraction of the cost.

    Durability

    Greater Durability than HPL

    3D-laminated tabletops outperform their HPL competition at every turn. Industry-standard NEMA testing has found 3D laminate to be significantly more scratch-resistant and wear-resistant as compared to HPL. What's more, 3D-laminated tabletops are seamlessly encased down around all the contoured edges and even through the grommet holes, and thus eliminate the easily-damaged 90-degree corners and edges of HPL tops. By sealing the exposed top and sides of the high-density MDF wood that is commonly used in table tops, 3D lamination protects against dimensional instability resulting from water damage or long-term absorption of moisture from air humidity, extending the life of the product.

    Look at an old office desk and chances are you can see some of the glue holding down the PVC edging starting to degrade. Eventually, this leads to peeling back of the edging, and exposure to moisture damage that can warp the MDF core of the table. With 3D lamination, there are no such edges to degrade over time. There is also no need to cover grommet holes with cheap plastic covers to hide the rough MDF inside. With 3D laminated grommet holes, you'll want to show them off rather than hide them.

    iMovR uses only domestically-produced two-ply 3D-laminate with a minimum .012″ thickness for exceptional hardness. This double-thick laminate provides a higher level of durability than standard thermofoils, with a NEMA Wear rating of 550–750 cycles, compared to a 300 cycle rating of standard HPL.

    Cleaning

    While commonly-found household cleaners can damage other tops, our 3D laminate stands up to a wide range of popular cleaning products, including Lysol, Clorox, and 5:1 bleach formulas. Not only are 3D laminated tops completely nonporous, they also have an extra layer specially designed to protect against abrasion, and another layer to protect against chemical damage, as compared to conventional thermofoil products. Traditionally used in hospital environments, iMovR now brings these same ultra-durable and versatile laminates to the commercial and home office environment.

    Built to Last

    iMovR 3D Laminate desktops are backed by our 10 Year Warranty.

    Environmental Information

    See our 3D Laminte environmental certifications HERE